Filter
Top Products
Installing Summit Family Switches
Summit Family Switches Hardware Installation Guide
132
After the switch is secured to the rack, install and connect power supplies as described on page 135 for
AC power supplies or on page 136 for DC power supplies.
Installing the Switch in a Four-Post Rack
To install the switch in a four-post rack:
1 At the back of the rack, attach a rear mounting bracket to each rear post, as shown in Figure 104.
Figure 104: Attaching Rear Mounting Brackets—Four-Post Installation
2 Attach an ESD-preventive wrist strap to your wrist and connect the metal end to an appropriate
ground point on the rack.
3 Set the switch on a secure work surface.
4 At the front of the switch, attach a rack-mounting bracket to each side as shown in Figure 105.
Position the bracket with the flange at the front edge of the switch.
SH_145