Filter
Top Products
Installing Summit Family Switches
Summit Family Switches Hardware Installation Guide
142
b Slide the spade terminal of the negative wire (–48 V) under the captive square washer on the
negative terminal (labeled –).
c Slide the spade terminal of the positive wire (–48 V RTN) under the captive square washer on the
positive terminal (labeled +).
Figure 115: Connecting the DC Power Cables (Part 1)
d Tighten both screws on the terminal block to 7 inch-pounds (0.99 Newton meters) (Figure 116).
4 Snap the cover into place over the terminal block (Figure 116).
SH_161
(+)
(–)
RTN
-48V