Installing Summit Family Switches
Summit Family Switches Hardware Installation Guide
154
After the switch is secured to the rack, install and connect power supplies as described in “Installing a
Summit X650 AC Power Supply” on page 157 or “Installing a Summit X650 DC Power Supply” on
page 158.
Installing the Switch in a Cabinet or Four-Post Rack
To install the switch in a cabinet or four-post rack:
1 At the back of the cabinet, attach a rear mounting bracket to each rear post, as shown in Figure 129
Figure 129: Attaching Rear Mounting Brackets—Cabinet Installation
2 Attach an ESD-preventive wrist strap to your wrist and connect the metal end to an appropriate
ground point on the rack.
3 Set the switch on a secure work surface.
4 At the front of the switch, attach a rack-mounting bracket to each side (Figure 130).
Position the bracket with the flange at the front edge of the switch.
SH_102