Summit Family Switches Hardware Installation Guide
197
Mixing ZR XENPAKs with Other Types
Table 31 lists the supported combinations of XENPAK types using ZR XENPAKs in a Summit X450
series switch. You can either install one ZR XENPAK and leave one slot empty or install one ZR
XENPAK and one SR XENPAK; the Summit X450 series switch does not support any other XENPAK
combinations when a ZR XENPAK module is installed. You must put the specified modules in the
specified slots, as shown in Table 31, for the switch to discover the ZR XENPAK correctly.
.
Summit XGM2-2xn Option Card
The Summit XGM2-2xn option card allows you to add up to two 10-gigabit XENPAK modules to the
following switches:
● Summit X450a-24t switch, running ExtremeXOS 11.5.0 (or later)
● Summit X450a-24tDC switch, running ExtremeXOS 11.5.0 (or later)
● Summit X450a-24x switch, running ExtremeXOS 11.6.1 (or later)
● Summit X450a-24xDC switch, running ExtremeXOS 11.6.1 (or later)
● Summit X450a-48t switch, running ExtremeXOS 11.5.0 (or later)
● Summit X450e-24p switch, running ExtremeXOS 11.5.0 (or later)
● Summit X450e-48p switch, running ExtremeXOS 11.6.1 (or later)
The Summit XGM2-2xn option card is compatible with the following 10-gigabit XENPAK modules:
● SR XENPAK module, operating in the 850 nm range
● LR XENPAK module, operating in the 1310 nm range
● ER XENPAK module, operating in the 1550 nm range
● ZR XENPAK module, operating in the 1550 nm range
● LX-4 XENPAK module, operating in the 1269-1355 nm range
● LW XENPAK module, operating in the 1310 nm range
Figure 167 shows the Summit XGM2-2xn option card.
Table 31: Summit X450 ZR XENPAK Combinations
Left Slot Right Slot
ZR XENPAK Empty
ZR XENPAK SR XENPAK