Filter
Top Products
Summit Family Switches
Summit Family Switches Hardware Installation Guide
42
Summit X450 Series Switches
The Summit X450 series switches are 24-port switches without PoE options. The ports are implemented
as fixed 10/100/1000BASE-t RJ-45 ports or as installable SFP modules. These switches are available only
with AC internal power supplies.
The Summit X450 series of switches consists of the following switches:
● Summit X450-24t Switch
● Summit X450-24x Switch
Summit X450-24t Switch
The front panel of the Summit X450-24t switch (Figure 27) includes:
● Twenty fixed autosensing 10/100/1000BASE-T ports (ports 5-24) that provide 20 Gbps of
high-density copper connectivity
● Four combination ports (ports 1-4) using RJ-45 connectors and SFPs to provide 4 Gbps of copper or
fiber connectivity
For more information about combination ports, see “Combination Ports and Failover” on page 16.
For information about SFPS, see the Extre me Ne two rks Plugg a ble Inte rfa ce Mo dule s Ins ta lla tio n G uide .
● LEDs to indicate port status and switch operating conditions.
For a description of the LEDs and their operation, see “Summit X450, X450a, and X450e Series
Switch LEDs” on page 58.
● Stack number indicator showing the position of this switch in a stacked configuration.
● Serial console port used to connect a terminal and perform local management.
Figure 27: Summit X450-24t Switch Front Panel
The rear panel of the Summit X450-24t switch (Figure 28) includes:
● Slot for the Summit XGM-2xn option card, which allows you to add one or two 10-gigabit XENPAK
modules
For information about the Summit XGM-2xn option card, see “Summit XGM-2xn Option Card” on
page 196.
● Management port with associated LEDs
● Two high-performance stacking ports with associated LEDs
Shared Ports
STACK NO.
Band On = Link
Blinking = Activity
S450_002D
10/100/1000 Mbps portsMini-GBIC ports
Combination ports
Console
port
Stack number
indicator