Filter
Top Products
Maintenance Procedures for Summit X650 and Summit X480 Series Switches
Summit Family Switches Hardware Installation Guide
212
5 Install the replacement VIM in the switch (Figure 181):
a Make sure the inserter/ejector levers are rotated down.
b Carefully slide the module into the switch until the inserter/ejector levers begin to rotate upward.
c Simultaneously rotate both levers upward to seat the module internal connectors.
d Insert and tighten the retaining screws you removed earlier.
Figure 181: Installing a VIM1 Module (VIM1-SummitStack Module Shown)
SH_093