Maintenance and troubleshooting 7-13
Troubleshooting
3. Remove the paper tray and remove any partially fed paper.
G
CC
T
ECHNOLOGIES
Elite XL
608
4. Reinstall the paper tray.
5. Close the printer access door and secure the locking latches.
The printer will enter its warm-up cycle and in a minute the front panel
display will indicate Ready.
For all paper jams, check the following:
• Make sure the paper is flat, dry, and within specifications. Fan the paper
before inserting it to loosen the sheets and make sure the edges are flush.
• Do not insert too much paper into the paper tray. The paper tray holds a
maximum of 250 sheets of 20 lb. paper.
• If you are low on paper, insert more paper in the paper tray.
• Make sure the paper size matches the Paper option selected in the Page
Setup dialog box.
• Make sure the paper length guide in the paper tray matches the size of
paper in the paper tray.