Filter
Top Products
98 USING THE M208’S COMMAND SET: npsh Command Set
ports on the unit and destname is the name of one of the units destinations.
See also: disable on page 97, list dest on page 99, list com1|com2 on page 98,
and list prn on page 100.
keycode
keycode
escapecharacter
List the hexadecimal value of escapecharacter.
See also: telnet on page 124.
List Commands
The list command provides these three possibilities:
list
choice
List current settings.
list default
choice
List default settings.
list stored
choice
List stored settings in EEPROM.
choice can refer to a number of parameters. All possible options are listed
next.
list arp
list arp
List the contents of the M208’s arp table.
list com1|com2
list com1|com2
List the current settings of the serial I/O port.
See also: set com1|com2 on page 105.
list date
list date
List the current date.
See also: set date on page 107.