Filter
Top Products
USING THE M208’S COMMAND SET: npsh Command Set 109
case sensitive.
set logpath
logpathname
port
tcpport
|prn
|com1|com2|email|syslog
Send the printer logging information either to a TCP port number, to one of
the M208’s I/O ports, to a particular user’s email address, or to SYSLOGD on
a TCP/IP host. tcpport is a TCP port in the range 1,024 to 65,000.
If the email or syslog option is selected, please see set sysinfo on page 114 for
setting up IP addresses to send to.
Do not use an I/O port for both printing jobs and printing logs.
set logpath
logpathname
type [job] [user] [pgcnt]
[cksum] [printer] [ioport]
Establish the type of printer logging. These types can be combined by placing
a space between each entry:
job Contents of job log.
user Username of print job.
pgcnt Number of pages each job uses. Needs bi-directional
communication. Not completely secure from user manipula-
tion.
cksum 16-bit checksum value to confirm integrity of data printed.
printer Printer errors are logged. The type of errors is dependant on
the particular printer’s reporting abilities. Needs bi-direc-
tional communication.
ioport Monitors printer error and out-of-paper messages through the
parallel port pins.
See also: Logpaths on page 92, list dest on page 99, list logpath on page 100,
and Capturing Printer Feedback on page 134.
Note