Filter
Top Products
CONFIGURING THE M208 FOR TCP/IP: Host Software 33
Table 1: npconfig/ezsetup Main Menu
Option Description
Configure New Unit Add a M208 to your network. This option provides for: IP
name, IP address, hardware address, netmask, and for root
and guest passwords. (ezsetup as well)
Configure Host Setup Configure a print destination on the host including com-
munication mechanism and processing options. (ezsetup
as well)
Detailed Configuration Options . . See Table 2: npconfig Detailed Configuration Options
Sub-Menu.
Check Current Print Server Status Display current status of a M208 and associated I/O ports.
Cancel a Print Job in the Print
Server
Display current status of a M208, current print jobs within
it, and a prompt for a print job to be cancelled.
Table 2: npconfig Detailed Configuration Options Sub-Menu
Option Description
Select Print Server Select the M208 you want to configure.
Configure Print Server’s Des-
tinations. . .
Configure M208 destination settings: name, I/O port, back-
channel, model, logpath, state, alternate destination, and ser-
vice(s).
Configure Print Server’s
Models . . .
Configure M208 model settings: name, type, banner page, car-
riage return insertion (onlcr), tab expansion (xtab), descram-
bling, ASCII to PostScript conversion (a2ps), and header and
trailer strings.
Configure Print Server’s I/O
Ports . . .
Configure M208 I/O port settings: state, timeout, handshaking,
parity, and speed.