Filter
Top Products
USING THE M208’S ADDITIONAL OPTIONS: Managing With SNMP 143
coldstart A generic trap generated every time the
M208 is powered on or reset.
authenticationFailure A generic trap generated whenever a disal-
lowed access is attempted.
lpqIOStatusChanged The only custom trap. This trap is generated
whenever an I/O port’s status changes.
No trap is generated on a CTS change on the
serial ports, only on a DCD change.
Hub Traps
The M208 generates nine traps regarding the hub component:
rptrHealth This trap conveys information related to the
operational status of the repeater and is part
of the 802.3 repeater specification.
m208PortDataRateMismatch A trap generated when the rptrMonitorPort-
Data-RateMismatches variable changes for
any port.
m208PortPartionStateChange A trap generated when the port partition state
changes for any port.
m208PortLinkTestStatus Change A trap generated when the link test status for
a port has changes.
m208GroupMJLPTrap A trap generated when the m208Group-
MJLPStatus variable changes.
m208PortLoopBackError Status- A trap generated when a loop back error
Change condition occurs.
m208PPortSQETestError Status- A trap generated when a SQE test error
Change occurs.
m208PPortAddrTrackSrcAddr- A trap generated when the source address
Match to match is received on a different port.
m208PPortAddrTrackSrcAddr- A trap generated when a the source
Changed address on a port changes.
N
o
t
e