Filter
Top Products
USING THE M208’S COMMAND SET: npsh Command Set 111
set model
modelname
name
newname
Change the name of a model to a new name. modelname is the current name
of the model and newname is the new name you wish to give the model. This
newname must be nine characters or less or else it will be truncated. In addi-
tion, all names are case sensitive.
set model
modelname
trailer
trailerstring
Set the trailer contents for a named model. The trailer is appended to the end
of every job that goes to any destination associated with the named model.
trailerstring is a string with a maximum of nine elements; each element may
include a letter, code (e.g. 0x04), or variable (e.g. $FF).
set model
modelname
type a2ps [
pageorient
[
page-
size
[
rows
|
width
]]] [cont]
Convert text jobs from ASCII to PostScript before sending them to the printer.
PostScript jobs are not processed, but passed on without conversion. The a2ps
default settings are portrait, letter, 60 rows, and 80 columns.
pageorient Direction of page: portrait | landscape.
pagesize Size of page: letter | legal | exec | a4.
rows Number of rows in page.
width Number of characters per line.
cont Continuously senses print job for data format. For example, if
there is a PostScript banner page in front of a PCL print job,
the M208 will sense both parts of the job separately and do
the conversion. Enabling this feature will decrease output
performance.
set model
modelname
type pcl-ps [
pclswvar psswvar
]
Switch printer modes if the printer is not capable of doing this on its own but
is capable of printing both PCL and PostScript jobs. To do this, the model
appends a header and trailer string to each job switching the printer to and
from the appropriate mode. The switch strings must be provided to tell the