Filter
Top Products
120 USING THE M208’S COMMAND SET: npsh Command Set
NIT Network Interface Tap. A module that serves as a generic
interface between the data link protocol layer (i.e. Ethernet )
and higher network protocol layers. Each NIT is indexed by
an interface number (ifnum).
papname Printer Access Protocol (PAP) name. An AppleTalk name for
each printer defined on the host. Makes up the second half of
the name listed in the Chooser and is transparently mapped to
an M208 destination. There can be a maximum of four print-
ers which can point to any one of eight destinations on the
M208.
store pserver
store pserver name
newservername
Store a new name for the M208 indicated by newservername. This name will
affect Novell, AppleTalk, and NetBIOS setups.
store pserver apple zone [
zonename
]
Store a particular AppleTalk zone on the unit. To clear the AppleTalk zone,
type store pserver apple zone and press enter.
store pserver applepap
papname
dest
destname
Alter the AppleTalk printer specified by papname to print to the destination
indicated by destname. This name does not appear in the Chooser.
store pserver applepap
papname
driver
chooser_driver
Change the AppleTalk printer specified by papname to use the printer driver
name specified by chooser_driver. This driver is selected in the Chooser
menu.
store pserver applepap
papname
name
newpapname
Change the AppleTalk printer name that appears in the Chooser. papname
makes up the second half of the name and is transparently mapped to an M208
destination.