Filter
Top Products
CONFIGURING THE M208 FOR NOVELL: Host Configuration 71
NetWare 4 Options
NetWare 4 introduces NDS and some new frame types. The M208 can be used in a
NetWare 4 environment with either of these options:
• Set the M208 up as a PSERVER replacing a dedicated workstation running
PSERVER.EXE or PSERVER.NLM on the file server. The M208 replaces these
loadable PSERVER’s so they are no longer needed.
• Set the M208 up as a RPRINTER interacting with an existing PSERVER.
If following a PSERVER setup, bindery emulation is required.
Included in this sub-section are the steps for a PSERVER setup since the steps have
changed now that bindery emulation is required. A RPRINTER setup is not included
since the only changes from a pre-NetWare 4 RPRINTER setup are some name
changes in PCONSOLE.
To configure the unit as a PSERVER in a NetWare 4 environment, you need to:
Step Action Result of Action
1 Log in to Novell as supervisor. Gives you supervisor rights.
2 Enter PCONSOLE. PCONSOLE’s Main Menu displays.
3 Press F4. Puts you into bindery emulation mode and
displays Main Menu.
4 Select PRINT QUEUES. List of currently-defined queues comes up.
5 Press <Insert> to add a queue. Asks for new queue’s name.
6 Type in this new name and press
<Enter>.
New queue is added to list.
7 Press <Escape>. Returns to PCONSOLE’s Main Menu.
8 Select PRINT SERVERS. A list of existing print servers displays.
9 Press <Insert> to add a new print
server.
Prompts you for the name of the print
server.
Note