Filter
Top Products
108 USING THE M208’S COMMAND SET: npsh Command Set
processed according to the options defined in the named model. Please see set
model on page 110 to configure this modelname.
set dest
destname
name
newname
Change the current name of a destination to a new name. destname is the cur-
rent name and newname is the new name you wish to give the destination.
This newname must be nine characters or less or else it will be truncated. In
addition, all names are case sensitive.
Caution
When you change a destination name, you may have to reconfigure the host to
reflect the change.
set dest
destname
service [[-]socket] [[-]lpd]
[[-]lpsched] [[-]rprinter] [[-]pserver] [[-]appletalk]
[[-]netbios] [[-]ftpd]
Set the destination to handle only certain print server services.
See also: Manipulating the M208’s Services on page 133.
set dest d1prn alternate d2com1
where print jobs going to d1prn are redirected to d2com1’s printer if the orig-
inal printer is currently busy, in error, or off-line.
set dest d1prn ioport prn
set dest d1prn backchannel com1
associates d1prn with PRN and COM1 to receive printer feedback.
See also: Destinations on page 89 and list dest on page 99.
set logpath
set logpath
logpathname
name
newname
Rename a set of printer logging options. logpathname is the current name and
newname is the new name you wish to give the logpath. This newname must
be nine characters or less or else it will be truncated. In addition, all names are
Examp
l
es