Filter
Top Products
5 - 28
Ignition Control/Ignition Off
Select either the Ignition Control/Ignition On or the Ignition Control/Ignition Off power scheme/plan when ignition
control of the Thor VM2 power on process is desired.
The Thor VM2 automatically switches between the Ignition Control/Ignition On or the Ignition Control/Ignition Off
power schemes/plans depending on the state of the vehicle ignition input. Default timeouts are shorter in this
scheme to conserve the vehicle battery charge.
The following default timeouts are used in the Ignition Control/Ignition Off power scheme/plan.
Note: By default Sleep is disabled and Hibernate is enabled. Because the Thor VM2 with Windows Embedded
Standard 7 or Windows 7 Professional cannot transition from Sleep to Hibernate due to a limitation of the
operating system, Sleep is disabled. Power savings are significantly greater using Hibernate.
The ignition input wire must be connected. If the user selects this power scheme/plan but the ignition is On, the
Ignition Control/Ignition On scheme/plan is used instead.
Windows Embedded Standard 2009
Setting
Plugged In
(AC or DC
Power)
Running on
Batteries
(UPS Power)
Turn off monitor 1 minute 1 minute
Turn of hard disks 5 minutes 1 minute
System standby/sleep 1 hour 10 minutes
System hibernate 6 hours 20 minutes
Windows Embedded Standard 7, Windows 7 Professional
Setting
Plugged In
(AC or DC Power)
On Battery
(UPS Power)
Dim the display Never Never
Turn of the display 1 minutes 1 minute
Put the computer to sleep Never (see note) Never (see note)
Hibernate after 60 minutes 20 minutes