Filter
Top Products
3 - 10
The keyboard keys are backlit. The keyboard backlight is manually controlled using the backlight key in the upper right
hand corner of the keyboard. Pressing the backlight key cycles the keyboard backlight through the levels of backlight
intensity: Off, Low intensity, Medium intensity, Maximum intensity, Off, etc. When the Thor VM2 is powered on, the key-
board backlight defaults to Off.
Since the keyboard is a USB device, by default the external keyboard backlight is turned off when the Thor VM2 enters
Standby/Sleep. This behavior can be changed by enabling USB power in Standby/Sleep on the Options (page 5-21)
control panel.
USB Keyboard / Mouse
A standard USB keyboard or mouse can be attached to the Thor VM2 using the appropriate adapter cable.
The Y cable attaches to the Thor VM2 and provides a USB connector. Please refer to documentation provided with the
USB keyboard or mouse for more information on their operation.
LED Functions
System LEDs
SYS (System Status) LED
LED Behavior System State
Solid Green • On
• On but Display Off
Green blinking very slowly
External power present
(1/2 sec. on, 4 1/2 sec. off)
• Standby/Sleep
Off
External power present
• Hibernate
• Off
Off
External power not present
• Hibernate
• Standby/Sleep
• Off
System LEDs
Connection LEDs
Programmable LED
Blue LED
Orange LED
P
UPS
SYS
SSD
UPS
SYS
SS
D
SYS (System Status) LED
UPS (Uninterruptible Power Supply) LED
SSD (Solid State Drive) LED