Filter
Top Products
5 - 50
Bar Code Readers
The Thor VM2 can use the following external bar code readers:
• Tethered hand-held scanners are tethered to a serial port or a USB host port (via a dongle cable) on the Thor VM2 Quick
Mount Smart Dock and are configured by scanning the engine-specific bar codes in the scanner manufacturer's programming
guide. The manufacturer's guides are usually shipped with the bar code reader.
• Wireless hand-held Bluetooth scanners are configured by scanning the engine-specific bar codes in the scanner
manufacturer's programming guide. The manufacturer's guides are usually shipped with the bar code reader.
• The body worn Bluetooth Ring Scanner module may be using a Symbol 4400 Ring Imager or a Symbol 955 Ring Scanner.
The BTRS module is configured by scanning the bar codes in the Bluetooth Ring Scanner Guide.
Scanner Wedge
Honeywell provides Freefloat Link*One for bar code decoding needs on the Thor VM2. Refer to the Freefloat website for
documentation on Freefloat Link*One.
Touch Screen Calibration
Start > Programs > PenMount Windows Universal Driver
To calibrate the touch screen, tap Start > Programs > PenMount Universal Driver > Utility > PenMount Control Panel.
Select PenMount 6000 USB and then tap Configure. Select Standard Calibration or Advance Calibration.
Advanced Calibration allows the user to select the number of calibration points. With either option, follow the on screen
instructions to touch the red square, hold the touch and then lift the stylus to complete the calibration process.