Filter
Top Products
6 - 5
Profile
Start > All Programs > Summit > Summit Client Utility > Profile tab
Note: Tap the Commit button to save changes before leaving this panel or the SCU. If the panel is exited before tapping
the Commit button, changes are not saved!
Factory Default Settings
When logged in as an Admin use the Profile tab to manage profiles. When not logged in as an Admin, the parameters can
be viewed, and cannot be changed. The buttons on this tab are dimmed if the user is not logged in as Admin. The Profile
tab was previously labeled Config.
Buttons
Profile Default
SSID Blank
Client Name Blank
Power Save CAM
Tx Power Maximum
Bit Rate Auto
Radio Mode BGA rates full
Auth Type Open
EAP Type None
Encryption None
Button Function
Commit Saves the profile settings made on this screen. Settings are saved in the profile.
Credentials Allows entry of a username and password, certificate names, and other information required to authen-
ticate with the access point. The information required depends on the EAP type.
Delete Deletes the profile. The current active profile cannot be deleted and an error message is displayed if a
delete is attempted.
New Creates a new profile with the default settings (see Profile Parameters) and prompts for a unique name.
If the name is not unique, an error message is displayed and the new profile is not created.
Rename Assigns a new, unique name. If the new name is not unique, an error message is displayed and the
profile is not renamed.