Filter
Top Products
5 - 29
Ignition Control/Ignition Off Behavior
When either Ignition Control power scheme/plan is selected and external power is present the Thor VM2 behaves
as described below. If external power is not present, refer to the UPS (page 5-32) section for Thor VM2 behavior.
Thor VM2 is Off and Vehicle Ignition is Off
Conditions
The Thor VM2 is Off and vehicle ignition is Off.
Result
The Thor VM2 remains Off regardless of external power. UPS charging is disabled.
Conditions
The Thor VM2 has external power but vehicle ignition is Off. The Power button is pressed.
Result
The Thor VM2 boots. Once booted the Thor VM2 follows the Ignition Control/Ignition Off power
scheme/plan with timers reset after the boot completes.
Thor VM2 is On and Vehicle Ignition is Switched to Off
Conditions
The Thor VM2 is On and vehicle ignition changes from On to Off.
Result
The Thor VM2 follows the Ignition Control/Ignition Off power scheme/plan with timers reset at the time
Ignition switched to Inactive. UPS charging is disabled.
An example of this case would be a Thor VM2 that is running on UPS and is then mounted on a dock that
has truck power and the ignition switch is already Off.