Filter
Top Products
5 - 51
BIOS
The Microsoft Windows operating system is installed before shipping. The default BIOS parameters are configured at that time.
In most cases, it is unnecessary to modify the BIOS parameters.
Generally, it is only necessary to enter the BIOS setup to change the boot order of the drives.
This section is not intended to detail all features of the BIOS, instead it is intended to cover the most commonly used setup
options.
Accessing the BIOS Setup
When the Embedded BIOS screen (Phoenix Technologies) is displayed press the Del key to enter BIOS setup.
Use the arrow keys to move around the screen.
To access and modify the BIOS on the Thor VM2, an external keyboard must be attached.
Boot Order
To view or edit the boot order, select the Boot tab.
By default, the first device in the boot order is USB Hard Drive.
The second device is the Windows CE Image.
Exiting BIOS Setup
To exit the BIOS setup, select the Exit tab and select one of these options:
• Save Setting and Restart
• Exit Setup without Saving Changes
• Reload Factory-Defaults and Restart
Thor VM2 Recovery DVD
A recovery DVD is available to restore the operating system on your Thor VM2 to the same state it had when it was shipped
from the factory. The recovery DVD may not reload all factory installed software. Depending on the operating system, a sepa-
rate recovery DVD may be provided for English, Traditional Chinese, Simplified Chinese, Japanese, Korean, French, Spanish,
Germain and Thai languages or some or all of these languages may be distributed on one DVD.
Contact Technical Assistance (page 9-1) for information on the recovery DVD and for assistance installing other factory loaded
software.
Thor VM2 with no Operating System
The Thor VM2 can be ordered with no operating system. In this case, the user must have:
• Windows 7 installation media
• A valid product licensing key
• Thor VM2 Windows 7 drivers DVD
When prompted for driver locations during installation and setup, direct the device wizard to the drivers DVD. If desired the driv-
ers can be copied to a different media, such as a USB drive.
CAUTION - Be very careful when using this utility to modify BIOS Setup parameters. The Thor VM2 may generate unex-
pected results when incorrect or conflicting parameter values are entered. Selecting incorrect or invalid options may re-
quire the Thor VM2 to be returned for repairs.
The parameters should only be modified by Information Services personnel or the system administrator.
If a USB drive, such as a thumb drive is attached to the Thor VM2, the device attempts to boot from the USB drive:
• If the USB drive contains a bootable sector, the Thor VM2 boots from the USB drive.
• If the USB drive does not contain a bootable sector, the Thor VM2 does not boot. Remove the USB drive and boot
the Thor VM2 again.
!
!