Filter
Top Products
5 - 31
Auto-On Behavior
When the Auto-On power scheme/plan is selected and external power is present the Thor VM2 behaves as
described below. If external power is not present, refer to the UPS (page 5-32) section for Thor VM2 behavior.
Thor VM2 is Off
Conditions
The Thor VM2 is Off and gets external power, such as
• Thor VM2 is installed on a powered Quick Mount Smart Dock with the dock power switch On
• Thor VM2 is already mounted to a dock and external power is applied to the dock
• Thor VM2 is already mounted to a dock and the dock power switch is turned On
Result
The Thor VM2 boots. Once booted the Thor VM2 follows the Auto-On power scheme/plan with timers
reset after the boot completes.
Thor VM2 is On
Conditions
The Thor VM2 is On and gets external power, such as
• Thor VM2 is installed on a powered Quick Mount Smart dock with the dock power switch On
• Thor VM2 is already mounted to a dock and external power is applied to the dock
• Thor VM2 is already mounted to a dock and the dock power switch is turned On
Result
The Thor VM2 continues to run and follows Auto-On power scheme/plan with timers reset at the time
power was connected.