Filter
Top Products
6 - 13
Note: Tap the Commit button to save changes. If this panel is closed before tapping the Commit button, changes are
not saved!
Logon Options
There are two options available, a Single Signon (page 6-14) option which uses the Windows username and password
as the credentials for 802.1x authentication and a Pre-Logon Connection (page 6-14) option which uses saved creden-
tials for 802.1x authentication before Windows logon.
RTS Thresh 2347 If the packet size exceeds the specified number of bytes set in the Re-
quest to Send (RTS) threshold, an RTS is sent before sending the pack-
et. A low RTS threshold setting can be useful in areas where many client
devices are associating with the Access Point.
This parameter cannot be changed.
LED Off The LED on the wireless card is not visible to the user when the wireless
card is installed in a sealed mobile device.
Options are: On, Off.
Tray Icon On Determines if the Summit icon is displayed in the System tray.
Options are: On, Off
The tray icon is not displayed when the Thor VM2 is running a Windows
Embedded Standard 2009, Windows Embedded Standard 7 or Windows
7 Professional operating system.
Hide Password On When On, the Summit Config Utility masks passwords (characters on the
screen are displayed as an *) as they are typed and when they are
viewed. When Off, password characters are not masked.
Options are: On, Off.
Admin Password SUMMIT
(or Blank)
A string of up to 64 alphanumeric characters that must be entered when
the Admin Login button is tapped. If Hide Password is On, the password
is masked when typed in the Admin Password Entry dialog box. The
password is case sensitive. This value is masked when the Admin is
logged out.
Options are: none.
Auth Timeout 8 seconds Specifies the number of seconds the Summit software waits for an EAP
authentication request to succeed or fail.
If the authentication credentials are stored in the active profile and the
authentication times out, the association fails. No error message or
prompting for corrected credentials is displayed.
If the authentication credentials are not stored in the active profile and
the authentication times out, the user is again prompted to enter the cre-
dentials.
Options are: An integer from 3 to 60.
Certs Path certificates A valid directory path, of up to 64 characters, where WPA Certificate Au-
thority and User Certificates are stored on the mobile device when not
using the Windows certificates store. Ensure the Windows folder path ex-
ists before assigning the path in this parameter. See Certificates (page
6-32) for instructions on obtaining CA and User Certificates. This value
is masked when the Admin is logged out.
Options are: none.
The complete path is C:\Program Files\Summit\certs
Ping Payload 32 bytes Maximum amount of data to be transmitted on a ping.
Options are: 32 bytes, 64, 128, 256, 512, or 1024 bytes.
Ping Timeout ms 5000 The amount of time, in milliseconds, that a device will be continuously
pinged. The Stop Ping button can be tapped to end the ping process
ahead of the ping timeout.
Options are: Any number between 0 and 30000 ms.
Ping Delay ms 1000 The amount of time, in milliseconds, between each ping after a Start Ping
button tap.
Options are: Any number between 0 and 30000 ms.
Logon Options SCU Use SCU or Windows login credentials.
Parameter Default Function