Filter
Top Products
5 - 30
Auto-On
Select the Auto-On power scheme/plan when it is desired that the Thor VM2 power on when external power is
connected.
In Auto-On mode, the Thor VM2 is turned On by the presence of external power with no user interaction required.
Ignition input is ignored when Auto-On Mode is enabled.
The following default timeouts are used in the Auto-On power scheme/plan.
Note: By default Sleep is disabled and Hibernate is enabled. Because the Thor VM2 with Windows Embedded
Standard 7 or Windows 7 Professional cannot transition from Sleep to Hibernate due to a limitation of the
operating system, Sleep is disabled. Power savings are significantly greater using Hibernate.
Windows Embedded Standard 2009
Setting
Plugged In
(AC or DC
Power)
Running on
Batteries
(UPS Power)
Turn off monitor 30 minutes 1 minute
Turn of hard disks 30 minutes 1 minute
System standby/sleep 5 hours 10 minutes
System hibernate Never 20 minutes
Windows Embedded Standard 7, Windows 7 Professional
Setting
Plugged In
(AC or DC Power)
On Battery
(UPS Power)
Dim the display Never Never
Turn of the display 30 minutes 1 minute
Put the computer to sleep Never (see note) Never (see note)
Hibernate after 300 minutes 20 minutes