Filter
Top Products
Chapter 13. Data Migration in zSeries environments 261
Figure 13-6 Check with Global Copy whether all data was replicated to the new volume
This approach is not really practical though. ICKDSF also allows you to query the status of a
Global Copy primary volume and displays the amount of data which is not yet replicated, as
shown in Example 13-1.
Example 13-1 Check through ICKDSF query commands that all data is replicated
PPRCOPY DDNAME(DD02) QUERY
ICK00700I DEVICE INFORMATION FOR 6102 IS CURRENTLY AS FOLLOWS:
PHYSICAL DEVICE = 3390
STORAGE CONTROLLER = 2105
STORAGE CONTROL DESCRIPTOR = E8
DEVICE DESCRIPTOR = 0A
ADDITIONAL DEVICE INFORMATION = 4A000035
ICK04030I DEVICE IS A PEER TO PEER REMOTE COPY VOLUME
QUERY REMOTE COPY - VOLUME
(PRIMARY) (SECONDARY)
SSID CCA SSID CCA
DEVICE LEVEL STATE PATH STATUS SER # LSS SER # LSS
------ --------- -------------- ----------- ----------- -----------
6102 PRIMARY PENDING XD ACTIVE 6100 02 8100 02
22665 01 22673 01
PATHS SAID/DEST STATUS DESCRIPTION
----- --------- ------ ----------------
1 00A4 0020 13 ESTABLISHED FIBRE CHANNEL PATH
IF PENDING/SUSPEND: COUNT OF TRACKS REMAINING TO BE COPIED = 2147
ICK02206I PPRCOPY QUERY FUNCTION COMPLETED SUCCESSFULLY
ICK00001I FUNCTION COMPLETED, HIGHEST CONDITION CODE WAS 0
00:33:54 11/19/04
After all applications are stopped or shut down Global Copy eventually replicates all data
across and the respective count is zero, as shown in Example 13-2 on page 262.