Marvel Group 88F6281 Computer Hardware User Manual


 
88F6281
Hardware Specifications
Doc. No. MV-S104859-U0 Rev. E Copyright © 2008 Marvell
Page 16 Document Classification: Proprietary Information December 2, 2008, Preliminary
RFC 1321 (The MD5 Message-Digest Algorithm)
RFC 1851 – The ESP Triple DES Transform
RFC 2104 (HMAC: Keyed-Hashing for Message Authentication).
RFC 2405 – The ESP DES-CBC Cipher Algorithm With Explicit IV
IEEE standard, 802.3-2000 Clause 14
ANSI standard X3.263-1995
See the Marvell Extranet website for the latest product documentation.
Document Conventions
The following conventions are used in this document:
Signal Range A signal name followed by a range enclosed in brackets represents a range of logically related
signals. The first number in the range indicates the most significant bit (MSb) and the last
number indicates the least significant bit (LSb).
Example: DB_Addr[12:0]
Active Low Signals # An n letter at the end of a signal name indicates that the signal’s active state occurs when
voltage is low.
Example: INTn
State Names State names are indicated in italic font.
Example: linkfail
Register Naming
Conventions
Register field names are indicated by angle brackets.
Example: <RegInit>
Register field bits are enclosed in brackets.
Example: Field [1:0]
Register addresses are represented in hexadecimal format.
Example: 0x0
Reserved: The contents of the register are reserved for internal use only or for future use.
A lowercase <n> in angle brackets in a register indicates that there are multiple registers with
this name.
Example: Multicast Configuration Register<n>
Reset Values Reset values have the following meanings:
0 = Bit clear
1 = Bit set
Abbreviations Kb: kilobit
KB: kilobyte
Mb: megabit
MB: megabyte
Gb: gigabit
GB: gigabyte
Numbering Conventions Unless otherwise indicated, all numbers in this document are decimal (base 10).
An 0x prefix indicates a hexadecimal number.
An 0b prefix indicates a binary number.