Filter
Top Products
Appendix C Using Your PC-LPM-16 (Non-PnP) Board
National Instruments Corporation C-11 PC-LPM-16/PnP User Manual
Figure C-5.
Bipolar Input (
±
5 V) Jumper Configuration (Factory Setting)
Bipolar Input Selection 2 (
±
2.5 V)
Select the bipolar (
±
2.5 V) input configuration by setting jumpers W1
and W2 as shown in Figure C-6.
Figure C-6.
Bipolar Input (
±
2.5 V) Jumper Configuration
Unipolar Input Selection 1 (0 to 10 V)
Select the unipolar (0 to 10 V) input configuration by setting jumpers
W1 and W2 as shown in Figure C-7.
Figure C-7.
Unipolar Input (0 to 10 V) Jumper Configuration
W1
C
B
A
W2
C
B
A
W1
C
B
A
W2
C
B
A
C
B
A
C
B
A
W1 W2