Filter
Top Products
CHAPTER 3 ND-71548 (E)
Page 248
Issue 2
INSTALLATION PROCEDURE
5. CONNECTION OF RECORDING EQUIPMENT
The following are required for using recording function:
• The RECC circuit card
• Recording Equipment
• 8-core Line Cable
• Rosette
An RECC card (PA-M87) connects DESK CONSOLEs and recording equipment in the following combinations:
• Six DESK CONSOLEs and one recording equipment × 1 set
• Three DESK CONSOLEs and one recording equipment × 2 set
Figure 016-9 RECC Card Cable Connection Diagram
NAP-200-016
Sheet 16/44
Installation of the DESK CONSOLE and
Cable Connection
50FLT-CHAMP
CABLE
Note 1: Recording equipment is positioned between the C.O. line and telephones.
Note 2: One recording equipment can be shared with multiple RECC cards.
Note 3: When sharing one recording equipment with multiple RECC cards, multiple connection of ZA and
ZB terminals is required.
R
E
C
C
DESK CONSOLE MDF
Installation Cable
8-core Line Cable
PIM
RECC
card
Front
Recording
Equipment
8-pin Modular Connector
8-core Line Cable
Rosette
MDF
A
B
LA
LB
KA
KB
A0
B0
M0A
M0B
K0A
K0B
L0A
L0B
T0A
T0B
ZA
ZB
L0B
T0A
T0B
ZA
ZB
Note 1
Note 3
Circuit Card Front Connector
PIM
Telephone
side leads
Note 1 C.O. line
side leads
8-pin Modular Connector
Note 2
L0A
Rosette
Recording
Equipment
R
E
C
C
PIM
Bottom View of DESK CONSOLE
REC