Filter
Top Products
CHAPTER 4 ND-71548 (E)
Page 298
Issue 2
SYSTEM STARTUP
NAP-200-020
Sheet 2/7
Program Install and Load
START
Flash Card Insertion Here describes the procedure for inserting a flash card into PC.
PC needs to be installed Windows 2000 and equipped with PCMCIA card
slot.
Insert Steps:
1. Insert a flash card into PC.
Note: The flash card (FLASH-ATA-320M) prepared by NEC must
be used.
2. Make sure the card icon appears in the task box, indicating PC recog-
nized the flash card successfully.
Software Merging
Here describes the procedure for merging basic software and software(s).
Prepare the appropriate CDs to be installed.
Merger Steps:
1. Select
"Program"→"MAT tools"→"MSVICD" to display "MSVICD"
window.
2. Select
"Initial Setup" and click "Execute" button.
3. When
"Step 1 Basic Software CD Copy" window displays, Insert a CD con-
taining Basic Software and select a folder to be copied in "Copy To" field.
Then click "Next" button.
4. A confirmation dialog displays indicating that making sure the path on the
screen, click "Yes" button to copy Basic Software into the folder.
5. When
"Step 2 Software Merge" window displays, insert the CDs (System
Capacity License, IP Capacity License, and Softphone Client Li-
cense) to be merged with the basic software. Then click "Next" but-
ton.
Note: The merged file varies depending on the system.
6. After the merger is complete, a dialog box displays, indicating whether to
keep merging software. To merge the file again, click
"Yes" button. Other-
wise, click
"No" button to exit the process.The merged file varies depending
on the system.
7. After the merger is complete, a dialog box displays, indicating whether to
keep merging software. To merge the file again, click
"Yes" button. Other-
wise, click
"No" button to exit the process.
Note:
When other message is displayed, refer to "ERROR MES-
SAGE LIST".
8. Click "OK" button to close the window.
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
A