Filter
Top Products
ND-71548 (E) CHAPTER 5
Page 333
Issue 2
INSTALLATION TEST PROCEDURE
NAP-200-031
Sheet 1/1
Line (LC, ELC, DLC, Card) Connection
Test
An ATTCON or D
term
is called
from each station. The called
party confirms the station
number.
On the MDF, a telephone set is connected to the line circuit
to be tested
The station (XXXX) to be tested goes off-hook and
confirms DT (Dial Tone).
The station (XXXX) calls an ATTCON or D
term
.
The called ATTCON or D
term
answers the call, and
confirms speech and the station number of the calling
station.
The call is released.
The ATTCON or D
term
calls a
station being tested.
The ATTCON or D
term
dials the station number of the
station being tested.
The called station answers and confirms speech.
The ATTCON or D
term
confirms that the dialed number and
the number of the station being tested are the same.
The call is released.
The test involving the station is
assigned as a Hot Line/House
Phone.
The station being tested goes off-hook and confirms Ring
Back Tone (RBT).
The station checks whether the call is routed to the
predetermined station/ATTCON or that a call is originated
to a predetermined trunk.
The called side answers the call and confirms speech.
The call is released.
END
Line being
tested
(XXXX)
ATTCON
D
term
ATI/ELC
LC/ELC
DT, RBT
A
*
*