Filter
Top Products
174 | Chapter 10. ACLs
ProSafe M4100 and M7100 Managed Switches
3. Bind the ACL with interface 1/0/1.
(Netgear Switch) (Interface 1/0/1)#ip access-group monitorHost in 1
4. V
iew the configuration.
(Netgear Switch) # show ip access-lists
Current number of ACLs: 1 Maximum number of ACLs: 100
ACL ID/Name Rules Direction Interface(s) VLAN(s)
------------------- ----- ---------- ------------------ ---------------
monitorHost 2 inbound 1/0/1
(Netgear Switch) #show ip access-lists monitorHost
ACL Name: monitorHost
Inbound Interface(s): 1/0/1
Rule Number: 1
Action......................................... permit
Match All...................................... FALSE
Protocol....................................... 255(ip)
Source IP Address.............................. 10.0.0.1
Source IP Mask................................. 0.0.0.0
Mirror Interface............................... 1/0/19
Rule Number: 2
Action......................................... permit
Match All...................................... TRUE
Web Interface: Configure ACL Mirroring
1. Create an IP access control list with the name monitorHost on the switch.
a. Select Security >
ACL > Advanced > IP ACL.