Filter
Top Products
496 | Chapter 29. DHCP L2 Relay and L3 Relay
ProSafe M4100 and M7100 Managed Switches
2. Create a routing interface and assign 10.100.1.1/24 to it.
a. Select Routing > IP >
Advanced > IP Interface Configuration.
A screen similar to the following displays.
b. Scroll down and select the 1/0/3 check box.
c. In the IP Address field, enter 10.100.1.1.
d. In the Subnet Mask field, enter 255.255.255.0.
e. In the Routing Mode field, select Enable.
f. Click Apply to save the settings.
3. Enable RIP on interface 1/0/3.
a. Select Routing > RIP >Advanced > Interface Configuration.
A screen similar to the following displays.
b. In the Interface field, select 1/0/3.
c. For RIP
Admin Mode, select the Enable radio button.
d. Click Apply to save the settings.
4. Set up the DHCP global configuration.
a. Select System > Services > DHCP Server > DHCP Server Configuration.