Filter
Top Products
Chapter 33. iSCSI | 553
ProSafe M4100 and M7100 Managed Switches
Enable iSCSI Awareness with DSCP
The example is shown as CLI commands and as Web interface procedure.
CLI: Enable iSCSI Awareness with DSCP
Use the following commands to enable iSCSI awareness, select DSCP, and set DSCP queue
number and aging time.
(Netgear Switch) #config
(Netgear Switch) (Config) #iscsi enable
(Netgear Switch) (Config) #iscsi cos dscp 46
(Netgear Switch) (Config) #iscsi aging time 10
(Netgear Switch) (Config) #exit
Web Interface: Enable iSCSI Awareness with DSCP
1. Enable iSCSI awareness, select DSCP, and set the DSCP queue number and aging
time.
a. Select Switching > iSCSI > Basic.
A screen similar to the following displays..
b. Enter the following information:
• In the iSCSI Status, select Enable.
• In the QoS Profile, select DSCP.
• In the DSCP
, select 46 (default value).
• In the remark, select Enable (default value).
• In the iSCSI
Aging Time, enter 10 (default value).
2. Click Apply to save the settings.