Filter
Top Products
Chapter 26. Tunnel | 417
ProSafe M4100 and M7100 Managed Switches
Web Interface: Create a Tunnel
Configure Switch GSM7328S_1
1. Enable IP routing on the switch.
a. Select Routing > IP > Basic > IP Configuration.
A screen similar to the following
displays.
b. For Routing Mode, select the Enable radio button.
c. Click Apply.
2. Enable IPv6 forwarding and unicast routing on the switch.
a. Select Routing > IPv6 > Basic> Global Configuration.
A screen similar to the
following displays.
b. For IPv6 Unicast Routing, select the Enable radio button.
c. For IPv6 Forwarding, select the Enable radio button.
d. Click Apply.
3. Create a routing interface and assign an IP address to it.