Filter
Top Products
544 | Chapter 32. Captive Portal
ProSafe M4100 and M7100 Managed Switches
2. Enable captive portal instance 1.
(Netgear Switch) (Config-CP)#configuration 1
(Netgear Switch) (Config-CP 1)#enable
3. Enable captive portal instance 1 on port 1/0/1.
(Netgear Switch) (Config-CP 1)#interface 1/0/1
Web Interface: Enable Captive Portal
1. Enable captive portal on the switch.
a. Select Security > Control > Captive Portal > CP Global Configuration. A
screen
similar to the following displays.
b. For Admin Mode, Select the Enable radio button.
c. Click Apply.
2. Enable captive portal instance 1 on the switch.
a. Select Security > Control > Captive Portal > CP Configuration.