NETGEAR M7100 Switch User Manual


 
530 | Chapter 31. DVMRP
ProSafe M4100 and M7100 Managed Switches
6. Enable IGMP mode on the interface 1/0/24.
(Netgear Switch) (Config)#interface 1/0/24
(Netgear Switch) (Interface 1/0/24)#ip igmp
(Netgear Switch) (Interface 1/0/24)#exit
(Netgear Switch) #show ip dvmrp neighbor
Interface ..................................... 1/0/11
Neighbor IP Address ........................... 192.168.3.2
State ......................................... Active
Up Time (hh:mm:ss) ............................ 00:01:03
Expiry Time (hh:mm:ss) ........................ 00:00:24
Generation ID ................................. 88099
Major Version ................................. 3
Minor Version ................................. 255
Capabilities .................................. Prune GenID Missing 11441
Received Routes ............................... 0
Received Bad Packets .......................... 0
Received Bad Routes ........................... 0
Interface ..................................... 1/0/3
Neighbor IP Address ........................... 192.168.4.1
State ......................................... Active
Up Time (hh:mm:ss) ............................ 00:01:17
Expiry Time (hh:mm:ss) ........................ 00:00:23
Generation ID ................................. 1116347728
Major Version ................................. 3
Minor Version ................................. 255
More Entries or quit(q)
Capabilities .................................. Prune GenID Missing 11441
Received Routes ............................... 0
Received Bad Packets .......................... 0
Received Bad Routes ........................... 0
(Netgear Switch) #show ip mcast mroute detail summary
Multicast Route Table Summary
Incoming Outgoing
Source IP Group IP Protocol Interface Interface List
------------- ------------ ---------- --------- ---------------
192.168.1.2 225.0.0.1 DVMRP 1/0/11 1/0/24