Filter
Top Products
Chapter 4. Port Routing | 67
ProSafe M4100 and M7100 Managed Switches
To delete the static route, simply add “no” keyword in the front of the “ip route” command.
Web Interface: Add a Static Route
1. Select Routing > Routing Table > Basic > Route Configuration to display the Route
Configuration screen.
2. In the Route Type list, select Static.
3. Fill in the Network Address field.
Note that this field should have a network IP address, not a host IP address. Do not enter
something like 10,100.100.1.
The last number should always be 0 (zero).
4. In the Subnet Mask field, enter a value that matches the subnet range that you want to use.
5. The Preference field is optional.
A value of 1 is entered by default if you do not enter a
number.
6. Click the Add button on the bottom of the screen.
The screen is updated with the static
route shown in the routing table.
7. T
o remove a route entry, either static or default, select the check box to the left of the entry,
and click the Delete button on the bottom of the screen.