Filter
Top Products
432 | Chapter 27. IPv6 Interface Configuration
ProSafe M4100 and M7100 Managed Switches
Configure DHCPv6 Mode on the Routing Interface
The routing interface supports DHCPv6 mode, which can get the IPv6 address from a
DHCPv6 server (address allocation).
Note: Before you enable DHCPv6 mode, you have to disable IPv6 unitcast
mode globally.
CLI: Configure DHCPv6 mode on routing interface
1. Enable IPv6 unicast globally.
(Netgear Switch) (Config)#ipv6 unicast-routing
2. Enable DHCPv6 on the interface 1/0/23.
(Netgear Switch) (Config)#interface 1/0/23
(Netgear Switch) (Interface 1/0/23)#routing
(Netgear Switch) (Interface 1/0/23)#ipv6 enable
(Netgear Switch) (Interface 1/0/23)#ipv6 address dhcp
(Netgear Switch) (Interface 1/0/23)