Filter
Top Products
Chapter 27. IPv6 Interface Configuration | 429
ProSafe M4100 and M7100 Managed Switches
Web Interface: Create an IPv6 VLAN Routing Interface
1. Create VLAN 500.
a. Select Switching > VLAN > Basic > VLAN Configuration.
A screen similar to the following displays.
b. In the VLAN ID field, enter 500.
c. In the VLAN T
ype field, select Static.
d. Click Add.
2. Add ports to VLAN 500.
a. Select Switching > VLAN >
Advanced > VLAN Membership.
A screen similar to the following displays.
b. In the VLAN ID list, select 500.
c. Click Unit 1.
The ports display.
d. Click the gray box under port 1 until U displays, indicating that the egress packet is
untagged for the port.
e. Click Apply.
3. Specify the PVID on port 1/0/1.
a. Select Switching > VLAN >
Advanced > Port PVID Configuration.