Filter
Top Products
494 | Chapter 29. DHCP L2 Relay and L3 Relay
ProSafe M4100 and M7100 Managed Switches
DHCP L3 Relay
This case has two steps, DHCP server configuration and DHCP L3 relay configuration. This
example shows how to configure a DHCP L3 relay on a NETGEAR switch and how to
configure DHCP pool to assign IP addresses to DHCP clients using DHCP L3 relay.
DHCP server DHCP L3 relay
PC
1/0/3
1/0/4
1/0/15
PC
1/0/16
Figure 48. DHCP L3 relay
Configure the DHCP Server Switch
CLI: Configure a DHCP Server
1. Enable routing on the switch.
(Netgear Switch) #config
(Netgear Switch) (Config)#ip routing
(Netgear Switch) (Config)#