Filter
Top Products
Chapter 15. Security Management | 291
ProSafe M4100 and M7100 Managed Switches
A screen similar to the following displays.
b. In the Radius Server IP Address field, enter 192.168.0.1.
c. In the Secret Configured field, select Ye
s.
d. In the Secret field, enter 12345.
e. Click Add.
7. Configure the guest VLAN.
a. Select Security > Port
Authentication > Advanced > Port Authentication.
A screen similar to the following displays.
b. Scroll down and select the port 1/0/1 and 1/0/24 check boxes.
c. In the Guest VLAN ID field, enter 2000.
d. Click Apply to save your settings.
Assign VLANs Using RADIUS
This feature allows the client to connect from any port and be assigned to the appropriate
VLAN assigned by the RADIUS server. This gives flexibility for the clients to move around the
network without requiring the administrator to do static VLAN configuration. When multiple
hosts are connected to the switch on the same port, only one host uses authentication. If any
VLAN information is applied on the port based on the authenticated host, the VLAN applies
that information to all the hosts that are connected to that port.