Filter
Top Products
Chapter 15. Security Management | 289
ProSafe M4100 and M7100 Managed Switches
c. In the VLAN Type field, select Static.
d. Click Add.
2. Add ports to VLAN 2000.
a. Select Switching > VLAN >
Advanced > VLAN Membership.
A screen similar to the following displays.
b. In the VLAN ID list, select 2000 .
c. Click Unit 1.
The ports display.
d. Click the gray boxes under ports 1 and 24 until U displays.
The U specifies that the egress packet is untagged for the port.
e. Click Apply.
3. Set force authorized mode on ports 1/0/6 and 1/0/12.
a. Select Security > Port
Authentication > Advanced > Port Authentication.
A screen similar to the following displays.
b. Scroll down and select the Interface 1/0/6 and 1/0/12, check boxes.
c. In the Control Mode list, select Force Authorized.
d. Click Apply to save settings.
4. Enable dot1x on the switch.