Filter
Top Products
58 | Chapter 3. LAG s
ProSafe M4100 and M7100 Managed Switches
Web Interface: Add Ports to LAGs
1. Add ports to lag_10.
a. Select Switching > LAG > LAG Membership.
A screen similar to the following displays.
b. In the LAG ID list, select LAG 1.
c. Click Unit 1. The ports display
.
d. Click the gray boxes under port 2 and 3.
Two check marks display in the box.
e. Click Apply to save the settings.
2. Add ports to lag_20.
a. Select Switching > LAG > LAG Membership.
A screen similar to the following displays.
b. Under LAG Membership, in the LAG ID list, select LAG 2.
c. Click Unit 1.
The ports display.