Filter
Top Products
266 | Chapter 14. MVR (Multicast VLAN Registration)
ProSafe M4100 and M7100 Managed Switches
f. Select Switching > VLAN > Advanced > VLAN Membership. A screen similar to
the following displays:
g. In the VLAN ID list, select 999.
h. Click Unit 1.
The ports display.
i. Click the gray boxes under port 9 until
T displays. The T specifies that the egress
packet is tagged for the ports.
j. Click Apply to save the settings.
k. Repeat steps from b to e, add port 0/1 to VLAN1 1001, add port 0/5 to VLAN2 1002,
and add port 0/7 to VLAN3 1003.
2. Enable MVR and multicast VLAN.
a. Select Switching > MVR > Basic > MVR Configuration.
A screen similar to the
following displays:
b. From the MVR Running list, select Enable.
c. In the MVR Multicast Vlan field, enter 999.
d. From the MVR mode list, select dynamic.
e. Click Apply.