Filter
Top Products
Chapter 20. SNMP | 371
ProSafe M4100 and M7100 Managed Switches
Web Interface: Enable SNMP Trap
1. Enable SNMP trap for the server 10.100.5.17.
a. Select System > SNMP > SNMP V1/V2 > T
rap Configuration. A screen similar to
the following displays.
b. In the Community Name field, enter public.
c. In the V
ersion list, select SNMPv1.
d. In the Address field, enter 10.100.5.17.
e. In the Status field, select Enable.
f. Click the Add button.
2. Set the Link Up/Down flag.
a. Select System > SNMP > SNMP V1/V2 > T
rap Flags. A screen similar to the
following displays.
b. For Link Up/Down, select the Enable radio button.
c. Click Apply.
SNMP V3
The example is shown as CLI commands and as a Web interface procedure.