Filter
Top Products
Chapter 27. IPv6 Interface Configuration | 422
27
27. IPv6 Interface Configuration
This chapter provides the following examples:
• Create an IPv6 Routing Interface
• Create an IPv6 Network Interface on page 425
• Create an IPv6 Routing VLAN on page 427
• Configure DHCPv6 Mode on the Routing Interface on page 432
Create an IPv6 Routing Interface
The example is shown as CLI commands and as a Web interface procedure.
CLI: Create an IPv6 Routing Interface
1. Enable IPV6 forwarding and unicast routing on the switch.
(Netgear Switch) (Config)#ipv6 forwarding
(Netgear Switch) (Config)#ipv6 unicast-routing