Filter
Top Products
Chapter 24. Double VLANs and Private VLAN Groups | 405
ProSafe M4100 and M7100 Managed Switches
b. Under VLAN Membership, in the VLAN ID list, select 200.
c. Click Unit 1. The ports display
.
d. Click the gray boxes under ports 6, 7, 16 and 17 until U displays.
The U specifies
that the egress packet is untagged for the port.
e. Click Apply.
3. Specify the PVID on ports 1/0/6, 1/0/7, 1/0/16, and 1/0/17.
a. Select Switching > VLAN >
Advanced > Port PVID Configuration. A screen similar
to the following displays.
b. Under PVID Configuration, scroll down and select the Interface 1/0/6,1/0/7,1/0/16,
and 1/0/17 check boxes.
c. In the PVID (1 to 4093) field, enter 200.
d. In the Acceptable Frame T
ype list, select Admit All.
e. Click Apply to save the settings.
4. Create a private group, group1.
a. Select Security > T
raffic Control > Private Group VLAN > Private Group VLAN >
Private Group Configuration. A screen similar to the following displays.
b. In the Group Name field, enter group1.
c. In the Group ID field, enter 1.
d. In the Group Mode list, select community.