Filter
Top Products
Chapter 15. Security Management | 315
ProSafe M4100 and M7100 Managed Switches
a. Select Security > Control > DHCP Snooping Interface Configuration.
A screen similar to the following displays.
b. Select Interface 1/0/1 check box.
c. For interface 1/0/1, in the T
rust Mode field, select Enable.
d. Click Apply.
A screen similar to the following displays.
4. View the DHCP Snooping Binding table.
Select Security > Control > DHCP Snooping Binding Configuration.
A screen similar to the following displays.
5. Enable IP source guard in the interface 1/0/2.
a. Select Security > Control > IP Source Guard > Interface Configuration.
b. Select the Interface 1/0/2 check box.
c. For the IPSG mode, select Enable.