NETGEAR M7100 Switch User Manual


 
294 | Chapter 15. Security Management
ProSafe M4100 and M7100 Managed Switches
8. Show the dot1x detail for 1/0/5.
(Netgear Switch) #show dot1x detail 1/0/5
Port........................................... 1/0/5
Protocol Version............................... 1
PAE Capabilities............................... Authenticator
Control Mode................................... auto
Authenticator PAE State........................ Authenticated
Backend Authentication State................... Idle
Quiet Period (secs)............................ 60
Transmit Period (secs)......................... 30
Guest VLAN ID.................................. 0
Guest VLAN Period (secs)....................... 90
Supplicant Timeout (secs)...................... 30
Server Timeout (secs).......................... 30
Maximum Requests............................... 2
VLAN Id........................................ 2000
VLAN Assigned Reason........................... RADIUS
Reauthentication Period (secs)................. 3600
Reauthentication Enabled....................... FALSE
Key Transmission Enabled....................... FALSE
Control Direction.............................. both
Maximum Users.................................. 16
Unauthenticated VLAN ID........................ 0
Session Timeout................................ 0
Session Termination Action..................... Default
Web Interface: Assign VLANS Using RADIUS
1. Assign the IP address for the Web Management Interface.
a. Select System > Management > Network Interface > IPv4 Network Configuration.