Filter
Top Products
Chapter 15. Security Management | 271
ProSafe M4100 and M7100 Managed Switches
A screen similar to the following displays.
b. Under Port Security Configuration, next to Port Security Mode, select the Enable
radio button.
c. Click Apply to save the settings.
2. Set the dynamic and static limit on the port 1/0/1:
a. Select Security > T
raffic Control > Port Security >Interface Configuration.
A screen similar to the following displays.
b. Scroll down and select the Interface 1/0/1 check box.
Now 1/0/1 appears in the Interface field at the top.
c. Enter the following information:
• In the Port Security field, select Enable.
• In the Max
Allowed Dynamically Learned MAC field, enter 10.
• In the Max
Allowed Statically Locked MAC field, enter 3.
d. Click Apply to save the settings.
Convert the Dynamic Address Learned from 1/0/1 to a
Static Address
The example is shown as CLI commands and as a Web interface procedure.